OniseOwo

How to Check If an Artisan Is Actually Qualified in Nigeria

NaijaMart Editorial · 19 Nov 2026

Hiring an artisan in Nigeria without checking their qualifications first is one of the fastest ways to end up with a botched job, a damaged property and no recourse. This guide walks you through exactly how to verify that the plumber, electrician, tailor, mechanic or other tradesperson you are about to hire actually knows what they are doing — before they set foot in your home or workshop.

Why Verification Matters More Than Ever This Season

November and December are peak season for household work. Nigerians returning home for Detty December want repairs done before they arrive. Wedding season is running at full speed. Everyone is rushing — which is precisely when unqualified or unreliable artisans thrive, because clients are too busy or too eager to ask the right questions.

A rushed hire in Lekki, Surulere or Ikeja can mean a flooded kitchen, a rewired flat that trips constantly, or an aso-oke outfit that arrives unwearable on the morning of the wedding. The small effort of verification upfront saves enormous grief later.

Step 1: Ask for Proof of Trade Training or Certification

Not every artisan has a formal certificate, and that alone does not disqualify them. What you are looking for is verifiable evidence of how they learned their trade.

  • Electricians: Ask whether they have been trained by or registered with the Council for the Regulation of Engineering in Nigeria (COREN) or have passed through a National Board for Technical Education (NBTE) programme. Many competent Lagos electricians trained under a master electrician for several years — ask how long and with whom.
  • Plumbers: Look for evidence of formal apprenticeship or attendance at a polytechnic trade programme. Ask whether they are familiar with Lagos State Water Corporation standards for internal plumbing work.
  • Mechanics: Ask whether the workshop is registered and whether the mechanic has attended any manufacturer-authorised training, particularly relevant if you drive a modern car with electronic systems.
  • Tailors: Ask to see a portfolio of completed garments — ideally pieces similar in complexity to what you need. For delicate fabrics like lace or aso-oke, ask specifically about their experience with that material.

If an artisan becomes defensive or vague when you ask these questions, that is information in itself.

Step 2: Verify Their Work History — Not Just Their Claims

Anyone can say they have ten years of experience. Verification means going beyond the claim.

  1. Ask for references you can actually contact. Two or three past clients whose work is comparable to yours. Ask those clients whether the artisan finished on time, whether the quality held up weeks or months later, and whether they would hire them again.
  2. Visit a completed job if possible. A plumber who recently fitted out a bathroom in Ajah or an electrician who rewired a flat in Yaba should not object to you seeing the finished work — with the client's permission.
  3. Search for the artisan by name or business name online. Check if they have a consistent presence, reviews on any platform, or any complaints logged publicly.
  4. Ask neighbours, estate managers or your building's facility team. In gated estates on the Island or in older mainland compounds, word travels fast. The estate manager often knows exactly which tradespeople have done reliable work inside the development.

Step 3: Use a Platform That Does the Vetting for You

If you do not have the time or local network to run these checks yourself — especially if you are organising repairs from abroad ahead of a December trip — using a platform that pre-vets artisans removes much of the guesswork.

NaijaMart OniseOwo connects you with vetted handwork professionals across trades, including plumbers, electricians, tailors and mechanics, booked with job protection built in. The vetting is done on the platform side before a professional appears in search results, which shifts the verification burden away from you. You can read about how the process works on the OniseOwo features page.

Job protection matters as much as vetting. Knowing that a mechanism exists to address disputes if work is not completed as agreed changes the dynamic of the whole engagement — the professional knows it too.

Step 4: Run a Quick On-the-Spot Skills Check

Even after references and platform vetting, a brief in-person assessment before you commit to a large job is sensible. Some practical ways to do this:

  • Ask the electrician to identify your DB board layout and explain what they would do before touching any wiring. A competent electrician will assess safely first; an unqualified one often reaches for tools immediately.
  • Ask the plumber to diagnose the problem before quoting. If they give you a diagnosis without looking properly, be cautious.
  • For tailors, ask them to take your measurements in front of you and repeat them back. Watch whether they note them down accurately and ask clarifying questions about your fit preferences.
  • For mechanics, ask them to explain what diagnostic steps they will follow before stripping any part of the car. Modern vehicles especially require a systematic approach.

Step 5: Check Their Tools and Materials

A qualified artisan typically has their own professional-grade tools. Be alert if someone arrives to rewire a flat with minimal equipment, or a plumber who expects you to supply everything including basic fittings without prior discussion.

It is entirely normal and correct to agree in writing (even a WhatsApp message counts) exactly who is supplying materials, what standard of materials will be used, and what happens if additional materials are needed mid-job. This is not distrust — it is professionalism, and a qualified artisan will recognise it as such.

A Note for Nigerians Planning Remotely from the Diaspora

If you are outside Nigeria and trying to arrange repairs or renovations ahead of your December visit, verification by video call is entirely workable. Ask the artisan to give you a video walkthrough of a recent job, or to show you their tools and workspace live. Platforms like OniseOwo that carry pre-verified professionals and built-in job protection are particularly useful in this situation, since you cannot rely on physically being present to run the checks yourself.

If your December plans involve a celebration as well as repairs — and many returnees are juggling both — NaijaMart PartyVendors lets you find and book caterers, decorators, photographers and other event vendors with past-client reviews visible before you book.

The Short Checklist Before You Hire

CheckHow to do it
Trade training or certificationAsk directly; request documentation
References from comparable jobsContact at least two past clients personally
Work history verificationVisit a finished job or view photos with client's permission
On-the-spot assessmentAsk diagnostic questions before they begin
Tools and materials agreementConfirm in writing before work starts
Platform vetting and job protectionBook through OniseOwo for pre-vetted professionals

Verification is not about being difficult. It is about being a client who earns — and gives — genuine professional respect. The artisans worth hiring welcome these questions. The ones who do not have already told you something important.

Questions people ask

Does a Nigerian artisan need a certificate to be considered qualified?

Not necessarily. Many highly skilled tradespeople in Nigeria trained through apprenticeships rather than formal institutions. What matters is verifiable evidence of how they learned — references, completed work you can inspect, and a willingness to explain their process clearly.

How do I verify an artisan's references without it feeling awkward?

Frame it as standard practice, which increasingly it is. Simply say you like to speak with one or two previous clients before starting any significant job. A professional artisan will not be offended; they may even offer references before you ask.

What is job protection when booking an artisan, and why does it matter?

Job protection means there is a mechanism on the booking platform to address the situation if work is not completed or not done as agreed — rather than leaving you with no recourse. NaijaMart OniseOwo books vetted professionals with job protection built into the arrangement.

Can I properly vet an artisan if I am organising the work from abroad?

Yes. Ask for a live video walkthrough of a recent job, check references by phone or video call, and use a platform like OniseOwo that pre-vets professionals before they appear in results. This removes much of the in-person verification burden when you cannot be physically present.

Should I be worried if an artisan does not own their own tools?

It depends on the trade and the scale of the job, but arriving without basic professional tools is worth noting. Discuss who supplies what — tools and materials — before work begins, and confirm this in writing so there are no surprises once the job is underway.

Written by NaijaMart Editorial with AI assistance, using live NaijaMart data on the day it was published. Prices are sellers' and vendors' asking prices on that day and can change. How we write and check these articles.

More from OniseOwo

Explore Our Platforms